DIY Extreme outdoor pullup bar

[Extremistpullup]

Pull up bar supplies

Two 4x6 x 10ft 37.14
One 1 x 72 Gas Pipe 22.48
Three 50 lb Quikrete 14.94
Two 1 inch floor Flanges 19.92
One can Paint 3.98
One 1 3/8 Steel Flat Bit 5.65
Eight 2 inch x 1/4 bolts & washers 3.12

Total: 107.23

Notes:I recommended a drill guide 29.96. If you do not want to drill a hole. Screw the flanges onto the pipe at each end. Have a muffler weld the pipe to the flange ($20.00 or less). Bolt to the insides of the post with eight 2 inch or more inch hex crews.

http://extremistpullup.com/do-it-yourself/" onclick="window.open(this.href);return false;