DIY Extreme outdoor pullup bar

Discussions concerning various equipments, accessories, homemade items, gadgets, etc used in the pursuit of fitness

Moderators: Ironman, Jungledoc, parth, stuward, jethrof

Post Reply
Posts: 70
Joined: Wed Nov 04, 2009 11:23 am
Location: Edmond, ok

DIY Extreme outdoor pullup bar

Post by Extremistpullup » Tue Jul 03, 2012 3:46 pm

Pull up bar supplies

Two 4x6 x 10ft 37.14
One 1 x 72 Gas Pipe 22.48
Three 50 lb Quikrete 14.94
Two 1 inch floor Flanges 19.92
One can Paint 3.98
One 1 3/8 Steel Flat Bit 5.65
Eight 2 inch x 1/4 bolts & washers 3.12

Total: 107.23

Notes:I recommended a drill guide 29.96. If you do not want to drill a hole. Screw the flanges onto the pipe at each end. Have a muffler weld the pipe to the flange ($20.00 or less). Bolt to the insides of the post with eight 2 inch or more inch hex crews." onclick=";return false;

Post Reply